ÅBOM Mats - matsabom@kth.se

• Noise Control for Cooling Fans on Heavy Vehicles

AKTURK Ali -

• Inlet Flow distortion and Lip Separation in Ducted Fans used in VTOL UAV Systems

AL MEZZAWI Ali - ali.almezzawi@cetim.fr

• Acoustic Characterization of a Centrifugal Fan in an Automotive Ventilation Unit Sound Predicting Model

ALLAM Sabry - allam@kth.se

• Noise Control for Cooling Fans on Heavy Vehicles

ARGÜELLES DIAZ Katia M. - arguelleskatia@uniovi.es

• Evaluation of Squirrel-Cage Fans for HVAC Applications in Public Transport: Key Parameters and Design Guidelines
• Fan-System Interaction and Blockage Effects for HVAC Multi-Fan Units

AXTMANN Gabriel - gabriel.axtmann@de.ebmpapst.com

• Numerical Investigation of Axial Fans in Serial Connection

BAKIR Farid - farid.bakir@ensam.eu

• Experimental Investigation of Ducted Counter-Rotating Axial Flow Fans

BALBACH Ralf - ralf.balbach@de.ebmpapst.com

• Implementation of Active Noise Control into Different Fan Applications

BALDWIN Richard M. - rbaldwin@swri.org

• Fin Fan Vibration Remediation

BALLESTEROS-TAJADURA Rafael - rballest@uniovi.es

• Evaluation of Squirrel-Cage Fans for HVAC Applications in Public Transport: Key Parameters and Design Guidelines

BAMBERGER Konrad - konrad.bamberger@uni-siegen.de

• Optimization of Axial Fans with Highly Swept Blades with Respect to Losses and Noise Reduction

BECKER Stefan - sb@ipat.uni-erlangen.de

• Stationary and Moving Surface Ffowcs Williams and Hawkings Computations of an Isolated Radial Impeller

BELTMAN Willem - willem.m.beltman@intel.com

• Experiments and Numerical Predictions of Flow Rates and Aero-Acoustics from Small Radial Notebook Blowers

BERRY Alain - alain.berry@usherbrooke.ca

• Tonal Noise Control from Centrifugal Fans Using Flow Control Obstructions

BESOMBES Michel -

• Fan Tonal Noise Reduction using Calibrated Obstructions in the Flow - An Experimental Approach
• Tonal Noise Control from Centrifugal Fans Using Flow Control Obstructions

BIANCHI Stefano - bianstefano@gmail.com

• Experiments on the Use of Symmetrized Dot Patterns for In-Service Stall Detection in Industrial Fans

BINDER Nicolas -

• Fan Noise Analysis Using Microphone Array

BONNET Pierre-Alain - pierre-alain.bonnet@valeo.com

• A Design of Experiment for Evaluating Installation Effects and the Influence of Blade Loading on the Aeroacoustics of an Automotive Engine Cooling Fan

BORELLO Domenico - domenico.borello@uniroma1.it

• Investigation on the Unsteady Aerodynamics of an Industiral Fan

BORGES Samuel Santos - samuelb@weg.net

• CFD Techniques Applied to Axial Fans Design of Electric Motors

BRAILKO Igor - mileshin@ciam.ru

• Numerical Method for 3D Computation of Turbomachinery Tone Noise

BRALY Julien - julien.braly@volvo.com

• Innovative Fan Drives for Hybrid Trucks

BRENNER Gunther - gunther.brenner@tu-clausthal.de

• 3D Unsteady CFD Simulation of the Unsteady Flow in a Centrifugal Fan
• Investigation of Unsteady Flows in a Centrifugal Fan using High-Speed PIV and Numerical Simulations

BRUNCK Nicholas - nick.brunck@flaktwoods.com

• Use of Grade 80 Steel in Fabricated Centrifugal Impeller

BRUNEAU Phillipe R.P. - pbrun@mweb.co.za

• Testing an Axial Flow Fan Designed for Air-Cooled Steam Condenser Application

BUDINGER Valérie -

• Fan Noise Analysis Using Microphone Array

CABROL Marie - mca@temp.fft.be

• Computational Aeroacoustic Analysis of an Industrial Fan Application using a Hybrid Approach

ÇAĞLAR Şaban - caglar@kit.edu

• Maximum Achievable Efficiency of Centrifugal Fans Without Housing
• Designing a Centrifugal Fan of Carbon Fiber Laminate for High Circumferential Speed
• Aeroacoustical Investigations on Axial Fans for Automotive Cooling Systems
• Investigations on the Swirl Flow Caused by Axial Fans - A Contribution to the Revision of ISO 5801

CAMCI Cengiz - cxc11@psu.edu

• Inlet Flow distortion and Lip Separation in Ducted Fans used in VTOL UAV Systems

ČANTRAK Đorđe - djcantrak@mas.bg.ac.rs

• Investigations on the Swirl Flow Caused by Axial Fans - A Contribution to the Revision of ISO 5801

CARNIEL Xavier - xavier.carniel@cetim.fr

• Acoustic Characterization of a Centrifugal Fan in an Automotive Ventilation Unit Sound Predicting Model
• Numerical Optimization of the Tonal Noise of a Backward Centrifugal Fan Using a Flow Obstruction

CAROLUS Thomas - thomas.carolus@uni-siegen.de

• Noise Proves Nothing - Sources of Fan Noise and Their Prediction
• Tonal Noise of an Isolated Axial Fan Rotor due to Inhomogeneous Coherent Flow Structures at the Intake
• Optimization of Axial Fans with Highly Swept Blades with Respect to Losses and Noise Reduction

CAULE Patrice - patrice.caule@technofan.com

• A Design of Experiment for Evaluating Installation Effects and the Influence of Blade Loading on the Aeroacoustics of an Automotive Engine Cooling Fan

CEZARIO Cassiano A. - cassiano@weg.net

• CFD Electric Motor External Fan System Comparison and Validation

CHASSAIGNON Christian - christian.chassaignon@wanadoo.fr

• Numerical Optimization of the Tonal Noise of a Backward Centrifugal Fan Using a Flow Obstruction
• Fan Tonal Noise Reduction using Calibrated Obstructions in the Flow - An Experimental Approach

CHAULET Vivian - v.chaulet@ziehl-abegg.fr

• CFD Simulations to Predict the Energy Efficiency of an Axial Fan for Various Casing Configurations

CHERIAUX Olivier - olivier.cheriaux@valeo.com

• Acoustic Characterization of a Centrifugal Fan in an Automotive Ventilation Unit Sound Predicting Model

CHERRIER Olivier -

• Fan Noise Analysis Using Microphone Array

CHRISTOPHE Julien - julien.christophe@vki.ac.be

• Free and Scattered Acoustic Field Predictions of the Broadband Noise Generated by a Low-Speed Axial Fan

CORSINI Alessandro - corsini@dma.ing.uniroma1.it

• On the role of CFD in the aerodynamic development of industrial fans or from equations to colors (and back again)
• On the Role of Leading-Edge Bumps in the Control of Stall On-Set in Axial Fan Blades
• Investigation on the Unsteady Aerodynamics of an Industiral Fan
• Experiments on the Use of Symmetrized Dot Patterns for In-Service Stall Detection in Industrial Fans

CORY Bill - bill.cory@btinternet.com

• Inlet Installation Effects on Different Types of Fans and Ductwork Designs

CRÉTEUR Yoann - yoann.creteur@etu.univ-poitiers.fr

• A Design of Experiment for Evaluating Installation Effects and the Influence of Blade Loading on the Aeroacoustics of an Automotive Engine Cooling Fan

CYRUS Jan - j.cyrus@seznam.cz

• Design and Aerodynamic Performance of High Pressure Axial Flow Fan

CYRUS Vaclav - cyrus.aht@iol.cz

• Design and Aerodynamic Performance of High Pressure Axial Flow Fan

D'UDEKEM Diego - diego.dudekem@fft.be

• Computational Aeroacoustic Analysis of an Industrial Fan Application using a Hybrid Approach

DARVISH Manoochehr -

• Design Improvements of Sirocco Type Fans by Means of Computational Fluid Dynamics and Stereo Particle Image Velocimetry
• Toward the CFD Simulation of Sirocco Fans: from Selecting a Turburlence Model to the Role of Celle Shapes

DE GENNARO Michele - michele.degennaro.fl@ait.ac.at

• Broadband Noise Modelling and Prediction for Axial Fans

DE MAILLARD Matthieu - m.demaillard@adtechnology.co.uk

• Optimization of Fan Noise by Coupling 3D Inverse Design and Automatic Optimizer

DE WILT Guido - Wilhelmus.DE-WILT@ec.europa.eu

• EU Policies on Energy Efficiency and the Impact on Fan Manufacturers

DELIBRA Giovanni - giovanni.delibra@uniroma1.it

• On the Role of Leading-Edge Bumps in the Control of Stall On-Set in Axial Fan Blades

DEMORY Bruno - bruno.demory@valeo.com

• A Design of Experiment for Evaluating Installation Effects and the Influence of Blade Loading on the Aeroacoustics of an Automotive Engine Cooling Fan

DESVARD Ludovic - ludovic.desvard@dyson.com

• An Investigation of the Effect of Uneven Blade Spacing on the Tonal Noise Generated by a Mixed Flow Fan

DETANDT Yves - yves.detandt@fft.be

• Computational Aeroacoustic Analysis of an Industrial Fan Application using a Hybrid Approach

DONOHUE Brian - brian.donohue@canterbury.ac.nz

• Failure Analysis of Impeller Blade Cracking in a Mechanical Vapour Recompressor (MVR) Fan

EBERLINC Matjaž - matjaz.eberlinc@fs.uni-lj.si

• Vortex Generation Behind the Cylinder Cascade of Fan Grill

ELS Danie N. J. - dnjels@sun.ac.za

• Simultaneous Measurement of Air Flow and Blade Loading Conditions in an Air-Cooled Steam Condenser Fan

FERNANDEZ ORO Jesus M. - jesusfo@uniovi.es

• Evaluation of Squirrel-Cage Fans for HVAC Applications in Public Transport: Key Parameters and Design Guidelines
• Fan-System Interaction and Blockage Effects for HVAC Multi-Fan Units

FERRARI Cristian - cristian.ferrari@unife.it

• Fluid Dynamic Design and Optimization of a Double Entry Fan Driven by Tractor Power Take Off for Mist Sprayer Application

FRANK Stefan - stefan.frank@htw-berlin.de

• Design Improvements of Sirocco Type Fans by Means of Computational Fluid Dynamics and Stereo Particle Image Velocimetry
• Toward the CFD Simulation of Sirocco Fans: from Selecting a Turburlence Model to the Role of Celle Shapes

FRÖHLIG Friedrich - Froehlig@kit.edu

• Investigations on the Swirl Flow Caused by Axial Fans - A Contribution to the Revision of ISO 5801

FURUKAWA Masato - furu@mech.kyushu-u.ac.jp

• Influence of Blade Number on Aerodynamic Noise of Propeller Fans for Outdoor Unit of Air-Conditioner

GABI Martin - gabi@kit.edu

• Designing a Centrifugal Fan of Carbon Fiber Laminate for High Circumferential Speed
• Maximum Achievable Efficiency of Centrifugal Fans Without Housing
• Investigations on the Swirl Flow Caused by Axial Fans - A Contribution to the Revision of ISO 5801
• Aeroacoustical Investigations on Axial Fans for Automotive Cooling Systems

GERARD Anthony - anthony.gerard@usherbrooke.ca

• Fan Tonal Noise Reduction using Calibrated Obstructions in the Flow - An Experimental Approach
• Tonal Noise Control from Centrifugal Fans Using Flow Control Obstructions

GONZALEZ Jose - aviados@uniovi.es

• Evaluation of Squirrel-Cage Fans for HVAC Applications in Public Transport: Key Parameters and Design Guidelines
• Fan-System Interaction and Blockage Effects for HVAC Multi-Fan Units

GOTH Yvon - yvon.goth@cetim.fr

• Acoustic Characterization of a Centrifugal Fan in an Automotive Ventilation Unit Sound Predicting Model
• Cetim_Ventil: a Software to Predict the Noise of a Cooling Fan under a Hood
• Fan Tonal Noise Reduction using Calibrated Obstructions in the Flow - An Experimental Approach
• Numerical Optimization of the Tonal Noise of a Backward Centrifugal Fan Using a Flow Obstruction

GUEDEL Alain - alain.guedel@cetiat.fr

• CFD Simulations to Predict the Energy Efficiency of an Axial Fan for Various Casing Configurations
• Inlet Installation Effects on Different Types of Fans and Ductwork Designs

GUERRAS-COLON F. Israel - guerrasfrancisco@uniovi.es

• Evaluation of Squirrel-Cage Fans for HVAC Applications in Public Transport: Key Parameters and Design Guidelines
• Fan-System Interaction and Blockage Effects for HVAC Multi-Fan Units

GULLBRAND Jessica - jessica.gullbrand@intel.com

• Experiments and Numerical Predictions of Flow Rates and Aero-Acoustics from Small Radial Notebook Blowers

HANGS Benjamin -

• Designing a Centrifugal Fan of Carbon Fiber Laminate for High Circumferential Speed

HAYASHI Hidechito - hidechto@nagasaki-u.ac.jp

• Flow Characteristics of Backward Curved Centrifugal Fan with Rectangular Casing

HEINEMANN Till - hei@ipat.uni-erlangen.de

• Stationary and Moving Surface Ffowcs Williams and Hawkings Computations of an Isolated Radial Impeller

HENNER Manuel - manuel.henner@valeo.com

• A Design of Experiment for Evaluating Installation Effects and the Influence of Blade Loading on the Aeroacoustics of an Automotive Engine Cooling Fan

HOČEVAR Marko - marko.hocevar@fs.uni-lj.si

• Vortex Generation Behind the Cylinder Cascade of Fan Grill

HUANG Lixi - lixi@hku.hk

• Suppression of Fan Noise of High Circumferential Mode Using Optimized Duct Wall Properties

HUR Nahmkeon - nhur@sogang.ac.kr

• A Numerical Analysis on the Aerodynamic Noise of Cross-FLow Fan by Using a 2-D Urans Simulation and Acoustic Analogy

HURAULT Jeremy - jeremy.hurault@dyson.com

• An Investigation of the Effect of Uneven Blade Spacing on the Tonal Noise Generated by a Mixed Flow Fan

IWASE Taku - taku.iwase.mf@hitachi.com

• Influence of Blade Number on Aerodynamic Noise of Propeller Fans for Outdoor Unit of Air-Conditioner

JONES Neil - neiljones@consultant.com

• An Initial Assessment of the Changes that will Appear in a Forthcoming (2012) Revision of EN 12101-3

JUSTIN Thomas - thomas.justin@volvo.com

• Innovative Fan Drives for Hybrid Trucks

KANG Seongwon - skang@sogang.ac.kr

• A Numerical Analysis on the Aerodynamic Noise of Cross-FLow Fan by Using a 2-D Urans Simulation and Acoustic Analogy

KIM Min-Suk -

• Numerical Optimization of the Tonal Noise of a Backward Centrifugal Fan Using a Flow Obstruction

KISHITANI Tetsushi - tetsushi.kishitani.bm@hitachi.com

• Influence of Blade Number on Aerodynamic Noise of Propeller Fans for Outdoor Unit of Air-Conditioner

KRAL Milo - milo.kral@canterbury.ac.nz

• Failure Analysis of Impeller Blade Cracking in a Mechanical Vapour Recompressor (MVR) Fan

KRÖGER Detlev G. - dgk@sun.ac.za

• Testing an Axial Flow Fan Designed for Air-Cooled Steam Condenser Application

KUCUKCOSKUN Korcan - korcan.kucukcoskun@ec-lyon.fr

• Free and Scattered Acoustic Field Predictions of the Broadband Noise Generated by a Low-Speed Axial Fan

KUEHNELT Helmut - helmut.kuehnelt@ait.ac.at

• Broadband Noise Modelling and Prediction for Axial Fans

LAMOTTE Lucille -

• Fan Noise Analysis Using Microphone Array

LAUFER Wolfgang - wolfgang.laufer@de.ebmpapst.com

• Numerical Investigation of Axial Fans in Serial Connection

LAW Anthony K. Y. - alaw@rilhk.com

• Effects of Housing Geometry on the Performance and Noise of a Two-Outlet Centrifugal Fan - A Numerical Study

LAZZARETTO Andrea - andrea.lazzaretto@unipd.it

• CFD Models for the Analysis of Rotor-Only Industrial Axial-Flow Fans

LE GOFF Vincent - vincent@exa.com

• Numerical Optimization of the Tonal Noise of a Backward Centrifugal Fan Using a Flow Obstruction

LEE Myungsung - cfdlove@sogang.ac.kr

• A Numerical Analysis on the Aerodynamic Noise of Cross-FLow Fan by Using a 2-D Urans Simulation and Acoustic Analogy

LEHWALD Andreas - andreas.lehwald@iff.fraunhofer.de

• Investigation of Unsteady Flows in a Centrifugal Fan using High-Speed PIV and Numerical Simulations

LENEVEU Romain - romain.leneveu@fft.be

• Computational Aeroacoustic Analysis of an Industrial Fan Application using a Hybrid Approach

LEUNG Randolph C. K. - mmrleung@polyu.edu.hk

• Effects of Housing Geometry on the Performance and Noise of a Two-Outlet Centrifugal Fan - A Numerical Study

LUCIUS Andreas - gunther.brenner@tu-clausthal.de

• 3D Unsteady CFD Simulation of the Unsteady Flow in a Centrifugal Fan
• Investigation of Unsteady Flows in a Centrifugal Fan using High-Speed PIV and Numerical Simulations

MANERA Julien - julien.manera@fft.be

• Computational Aeroacoustic Analysis of an Industrial Fan Application using a Hybrid Approach

MASI Massimo - massimo.masi@unipd.it

• CFD Models for the Analysis of Rotor-Only Industrial Axial-Flow Fans

MASSON Patrice - patrice.masson@usherbrooke.ca

• Tonal Noise Control from Centrifugal Fans Using Flow Control Obstructions

MATTERN Philipp - mattern@kit.edu

• Investigations on the Swirl Flow Caused by Axial Fans - A Contribution to the Revision of ISO 5801

MATYSCHOK Berthold - matyschok@fst.tu-darmstadt.de

• The Influence of the Reynolds Number and Roughness on the Efficiency of Axial and Centrifugal Fans – A Physically Based Scaling Method

MAUCH Herrmann - h.mauch@huerner-funken.de

• Designing a Centrifugal Fan of Carbon Fiber Laminate for High Circumferential Speed

MENDONCA Fred - fred.mendonca@uk.cd-adapco.com

• Computational Aeroacoustic Analysis of an Industrial Fan Application using a Hybrid Approach

MILAVEC Matej - matej.milavec@hidria.com

• Vortex Generation Behind the Cylinder Cascade of Fan Grill

MILESHIN Victor - mileshin@ciam.ru

• Numerical Method for 3D Computation of Turbomachinery Tone Noise
• Numerical and Experimental Investigations of Single-Flow and Bypass-Flow Fans

MINCK Olivier - olivier.minck@microdb.fr

• Fan Noise Analysis Using Microphone Array

MOHAMED ZAMZAM Muhammad Affendi Bin - muhammad.affendi@dyson .com

• An Investigation of the Effect of Uneven Blade Spacing on the Tonal Noise Generated by a Mixed Flow Fan

MOREAU Stephane - stephane.moreau@usherbrooke.ca

• Tonal Noise Control from Centrifugal Fans Using Flow Control Obstructions

MORGAN Tessa - tessa.morgan@volvo.com

• Innovative Fan Drives for Hybrid Trucks

MORINI Mirko - mirko.morini@unife.it

• Fluid Dynamic Design and Optimization of a Double Entry Fan Driven by Tractor Power Take Off for Mist Sprayer Application

MUIYSER Jacques - 14903709@sun.ac.za

• Simultaneous Measurement of Air Flow and Blade Loading Conditions in an Air-Cooled Steam Condenser Fan

MÜLLER Stefan - mue@ipat.uni-erlangen.de

• Stationary and Moving Surface Ffowcs Williams and Hawkings Computations of an Isolated Radial Impeller

NAGATA Atsushi - nagata.atsushi1@jp.panasonic.com

• Flow Characteristics of Backward Curved Centrifugal Fan with Rectangular Casing

NAKAMURA Kyohei - niconicoswimmer@yahoo.co.jp

• Flow Characteristics of Backward Curved Centrifugal Fan with Rectangular Casing

NOURI Hussain - hussain.nouri@paris.ensam.fr

• Experimental Investigation of Ducted Counter-Rotating Axial Flow Fans

OKELEY Paul - paul.okeley@flaktwoods.com

• Use of Grade 80 Steel in Fabricated Centrifugal Impeller

OREKHOV Igor -

• Numerical and Experimental Investigations of Single-Flow and Bypass-Flow Fans

PANEK Pavel - aht@iol.cz

• Design and Aerodynamic Performance of High Pressure Axial Flow Fan

PANKOV Sergey - mileshin@ciam.ru

• Numerical Method for 3D Computation of Turbomachinery Tone Noise
• Numerical and Experimental Investigations of Single-Flow and Bypass-Flow Fans

PANTERMUEHL P. Joe -

• Fin Fan Vibration Remediation

PARK Jeongtaek - jeongtaek.park@lge.com

• A Numerical Analysis on the Aerodynamic Noise of Cross-FLow Fan by Using a 2-D Urans Simulation and Acoustic Analogy

PELZ Peter - pelz@fst.tu-darmstadt.de

• The Influence of the Reynolds Number and Roughness on the Efficiency of Axial and Centrifugal Fans – A Physically Based Scaling Method

PEROT Franck - perot@exa.com

• Numerical Optimization of the Tonal Noise of a Backward Centrifugal Fan Using a Flow Obstruction

PILLAI Venkat K. -

• Fin Fan Vibration Remediation

PINELLI Michele - michele.pinelli@unife.it

• Fluid Dynamic Design and Optimization of a Double Entry Fan Driven by Tractor Power Take Off for Mist Sprayer Application

RATTER Heiko -

• Maximum Achievable Efficiency of Centrifugal Fans Without Housing
• Designing a Centrifugal Fan of Carbon Fiber Laminate for High Circumferential Speed

RAVELET Florent - florent.ravelet@ensam.eu

• Experimental Investigation of Ducted Counter-Rotating Axial Flow Fans

RISPOLI Franco - franco.rispoli@uniroma1.it

• Investigation on the Unsteady Aerodynamics of an Industiral Fan

ROBITU Mirela - mirela.robitu@cetiat.fr

• CFD Simulations to Predict the Energy Efficiency of an Axial Fan for Various Casing Configurations

ROSSIKHIN Anton - rossikhin@ciam.ru

• Numerical Method for 3D Computation of Turbomachinery Tone Noise

ROSSINI Mauro - mrossini@idealitalia.it

• Fluid Dynamic Design and Optimization of a Double Entry Fan Driven by Tractor Power Take Off for Mist Sprayer Application

SANTOLARIA MORROS Carlos - cs@uniovi.es

• Evaluation of Squirrel-Cage Fans for HVAC Applications in Public Transport: Key Parameters and Design Guidelines
• Fan-System Interaction and Blockage Effects for HVAC Multi-Fan Units

SARRAF Christophe - christophe.sarraf@ensam.eu

• Experimental Investigation of Ducted Counter-Rotating Axial Flow Fans

SASAKI Souichi - souichi@nagasaki-u.ac.jp

• Flow Characteristics of Backward Curved Centrifugal Fan with Rectangular Casing

SCHEIT Christoph - sh@ipat.uni-erlangen.de

• Stationary and Moving Surface Ffowcs Williams and Hawkings Computations of an Isolated Radial Impeller

SCHMITZ Michael - michael.schmitz@de.ebmpapst.com

• Numerical Investigation of Axial Fans in Serial Connection

SCHNEIDER Marc - marc.schneider@de.ebmpapst.com

• Implementation of Active Noise Control into Different Fan Applications

SCHRAM Christophe - christophe.schram@vki.ac.be

• Free and Scattered Acoustic Field Predictions of the Broadband Noise Generated by a Low-Speed Axial Fan

SCHWEIGER Vlado - vlado.schweiger@hidria.com

• Vortex Generation Behind the Cylinder Cascade of Fan Grill

SHEARD Geoff - geoff.sheard@flaktwoods.com

• Use of Grade 80 Steel in Fabricated Centrifugal Impeller
• On the Role of Leading-Edge Bumps in the Control of Stall On-Set in Axial Fan Blades
• An Initial Assessment of the Changes that will Appear in a Forthcoming (2012) Revision of EN 12101-3
• Experiments on the Use of Symmetrized Dot Patterns for In-Service Stall Detection in Industrial Fans
• Investigation on the Unsteady Aerodynamics of an Industiral Fan

SHIRAHAMA Seiji - shirahama.seiji@jp.panasonic.com

• Flow Characteristics of Backward Curved Centrifugal Fan with Rectangular Casing

SIEBER Sten -

• Investigations on the Swirl Flow Caused by Axial Fans - A Contribution to the Revision of ISO 5801

SIMMS Mark - msimms@ventac.com

• Investigation into the Sound Power Level Reduction Achieved using Acoustic Jackets on a Centrifugal Fan and an Axial Fan

ŠIROK Branko - branko.sirok@fs.uni-lj.si

• Vortex Generation Behind the Cylinder Cascade of Fan Grill

SPRINGER Matthias - sp@ipat.uni-erlangen.de

• Stationary and Moving Surface Ffowcs Williams and Hawkings Computations of an Isolated Radial Impeller

STEVENS Mark - mstevens@amca.org

• Inlet Installation Effects on Different Types of Fans and Ductwork Designs

STONJEK Stefan - stonjek@fst.tu-darmstadt.de

• The Influence of the Reynolds Number and Roughness on the Efficiency of Axial and Centrifugal Fans – A Physically Based Scaling Method

STURM Michael - michael.sturm@uni-siegen.de

• Tonal Noise of an Isolated Axial Fan Rotor due to Inhomogeneous Coherent Flow Structures at the Intake

SYMES Ash - ashley.symes@dyson.com

• An Investigation of the Effect of Uneven Blade Spacing on the Tonal Noise Generated by a Mixed Flow Fan

TANNOURY Elias - elias.tannoury@valeo.com

• A Design of Experiment for Evaluating Installation Effects and the Influence of Blade Loading on the Aeroacoustics of an Automotive Engine Cooling Fan

THEVENIN Dominique - thevenin@ovgu.de

• Investigation of Unsteady Flows in a Centrifugal Fan using High-Speed PIV and Numerical Simulations

TIETJEN Bastian -

• Design Improvements of Sirocco Type Fans by Means of Computational Fluid Dynamics and Stereo Particle Image Velocimetry

TOURNOUR Michel - michel.tournour@lmsintl.com

• Free and Scattered Acoustic Field Predictions of the Broadband Noise Generated by a Low-Speed Axial Fan

VAN DER SPUY Sybrand J. - sjvdspuy@sun.ac.za

• Simultaneous Measurement of Air Flow and Blade Loading Conditions in an Air-Cooled Steam Condenser Fan
• Testing an Axial Flow Fan Designed for Air-Cooled Steam Condenser Application

VELARDE-SUAREZ Sandra - sandrav@uniovi.es

• Evaluation of Squirrel-Cage Fans for HVAC Applications in Public Transport: Key Parameters and Design Guidelines
• Fan-System Interaction and Blockage Effects for HVAC Multi-Fan Units

VERLHAC Jean-Marie - jean-marie.verlhac@cetim.fr

• Fan Noise Control: Case of Data Centres

VINOKUR Roman - romanv@resmed.com

• Simplified Theory of a Risk of Thermal Catastrophe in Air-Cooled Electronic Circuits

VON BACKSTRÖM Theodore W. - twvb@sun.ac.za

• Testing an Axial Flow Fan Designed for Air-Cooled Steam Condenser Application

WESTER Lars -

• Noise Control for Cooling Fans on Heavy Vehicles

WISE Steve - stevewise@att.net

• 25 Years Ago, Active Control First Appeared as a Great Solution for Fan Noise - What has Happened?

WONG Ian Y. W. - catershoot@hotmail.com

• Effects of Housing Geometry on the Performance and Noise of a Two-Outlet Centrifugal Fan - A Numerical Study

XIA Yingan - xia@punker.de

• Maximum Achievable Efficiency of Centrifugal Fans Without Housing

YANG Yang - yang.yang@tu-clausthal.de

• 3D Unsteady CFD Simulation of the Unsteady Flow in a Centrifugal Fan

ZANGENEH Mehrdad - m.zangeneh@ucl.ac.uk

• Optimization of Fan Noise by Coupling 3D Inverse Design and Automatic Optimizer

ZAYANI Mohamed - zayani@kit.edu

• Aeroacoustical Investigations on Axial Fans for Automotive Cooling Systems